Wednesday 12 September 2012

Chumkie's Cathedral Windows QAL#3

After the very popular 'Chumkie's Cathedral Windows QAL#1 and 2', the awesome DQ Chumkie is back again with the 3rd installment of the Desi QAL.

The Traditional Cathedral Windows  

Finished Size of Quilt = 16”
Finished Size of Block = 4”

For the third technique in this series for constructing Cathedral Windows, we will be making a cushion cover or a mini quilt or a table topper, comprising 16 blocks arranged 4 blocks across by 4 blocks down.

The finished mini quilt

The components of a Cathedral Window block are the foundation or background fabric, the frame and the window pane.  In this variation, the foundation and frame are made from the same fabric.  The window panes can be as varied as you wish.

Table for Cutting Instructions
 Note: 
1. The cutting instructions will make 1 CW block.
2. The numbers in parentheses in the column descriptions represent the number of squares required for each CW block. 
3. The window pane should be cut 1/4” smaller than the finished size of the frame.  Measure for and cut the window panes after the first frame is constructed.

Block Size Foundation (1) Pane (1) approx.
2” 4 ½“ 1 ¼“
3” 6½ “ 2”
4” 8 ½” 2 1/4”
5” 10 ½“ 3”
6” 12 ½ “ 4”

For 16 Cathedral Window blocks that will each finish at 4” square, refer to the table above for the 4”block and cut

16 foundations
16 window panes (not shown – cut after 1st frame is constructed)

Cut 16 foundation squares

Make an 8” template from cardboard for pressing a ¼“ seam on 4 sides of each foundation square.
Use a box cutter to cut cardboard template

Place the template in the center of the foundation and press ¼“ seam using the template as a guide.
Press 1/4" seam on 4 sides of foundation around template 

Fold the foundation in half and press.  Fold in half again and press to crease a vertical and horizontal line on the foundation.
Create two folds on foundation 

Using the creases as a guide, fold the 4 corners to the center and press.
Fold 4 corners to center and press

Do this again.  Fold the 4 corners to the center and press.  This is your 4” Cathedral Window block.
4" Cathedral Window block

Repeat this process for all 16 foundation squares.  To join the foundations together, open a flap on two blocks and sew them together on the creases. 
Sew adjacent flaps on two blocks

The sewn flaps make 1 frame.  Measure 1 side of the frame and cut 16 window panes ½“smaller than the size of the frame.  My frame measured 2 ¾“, so my window panes were cut 2 ¼“ square.
Four 4 1/2 " fabric squares
cut in 4 = 16 window panes

Join all 16 foundations in this way and there should be 8 pairs.  Join 2 pairs together by sewing the two flaps that are between the 2 sewn flaps. 
1 quadrant with 4 flaps sewn together

Join the 4 quadrants together and tack the corners of the frames down with a cross stitch.  Place a window pane in the center of a frame, roll the bias sides of the frame around it and pin in place.
Pin window panes in place

Sew the bias sides of the frame around each window pane and your 16” cushion cover is done!

Completed Mini Quilt

This quilt does not require batting or a backing.  Sewing the frames down over the window panes serves as the quilting. 

Quilting on Back of Mini Quilt

- There is no need to make a backing for the cushion cover because the back is already done!
- Use a 16" pillow insert for a cushion.
- If this quilt is to be used as a table topper, no more work needs to be done. Just use as is!

love,
Chumkie


2 comments: